Cameron Mallet Putters, the RED X and Futura Phantom, and Two Limited Edition Cameron Models

This article will discuss several putter product linesline retail for $300.
offered by Scotty Cameron and Titleist. These willFuture Phantom Mallet Putters
include the two lines of mallet putters, the RED X®There are two putters in this product line, the Mallet
series and the Futura Phantom, as well as two limitedand the Mallet 2. The difference between the two is
edition putters.that the shaft connects to the mallet head at almost
RED X® Mallet Puttersthe center for the Mallet 2, whereas for the Mallet
As is the case with many of Scotty Cameron'sputter the shaft connects closer to the heel. There is
putters, the mallet head designs of this line are veryno shaft offset for either putter. As the product line
sculptured looking and pleasing to the eye. There is atname implies, these putters have a very futuristic and
once a certain boldness in the designs but also astylish look to them. Behind the flat putter face is a
simplicity as well. One wonders if Cameron doesn't dostainless steel back plate that has a five-line alignment
sculpture on the side. The newest putters in this series,configuration. Behind that is a semicircular bar which
the Red X3 and the Red X5, are just being shipped togives the putter its mallet shape. It is obvious from
Titleist retailers as this article is being written insimply looking at these putters that the weight has
mid-September 2007. Both of these putters are milledbeen redistributed to obtain a high moment of inertia, or
from 303 stainless steel, and they have a blackMOI, which provides forgiveness on off-center hits.
anodized sole plate as well as a glare resistantThe putters come with the standard loft of 4 degrees
charcoal mist finish. Cameron has used this glareand standard lie angle of 71 degrees, have no shaft
resistant finish on a number of his putter designs foroffset, and are available in lengths of 34 and 35 inches.
2007. All the mallet putters in the product line have aThe Mallet 2 is only available in right-handed models.
single alignment line. The differences between theseThe materials used to produce the mallet heads are
two putters are that the Red X3 has a traditional shaft661 aircraft aluminum with a stainless steel back
with a ¼ shaft offset obtained by a single bendweight, as mentioned above. Both putters retail for
in the shaft, and that the Red X5 has a full shaft$300.
offset and a plumbing neck. Both have the standard 4Limited Edition Catalina Classic
degrees of loft and 71 degrees of lie angle, and theyThis is a classic putter design with only about 2000
both come in lengths of 33, 34, and 35 inches. Forpieces produced. The head of the putter is made of
left-handers, only the Red X3 is available in a 35 inchcarbon steel and is coated with the charcoal mist
length.anti-glare finish which also increases the putter's
The older members of this product line are the Red Xdurability. There is a single aiming line on the back
and the Red X2, and there are a number of variationscenter flange, and the grip is a soft stitched leather.
of these. There are belly putters for both models,Teryllium Ten Limited Edition
called the Red X Mid and the Red X2 Mid, and there isTeryllium is a copper metal made from 12 different
a long length putter called the Red X2 Long. Thesealloys, and it provides a soft feel and good sound due
putters were designed in 2003, and Cameron did a lotto the thick copper insert. Cameron released the first
of research with different materials to obtain the bestteryllium putters 10 years ago and is following up with
feel and sound possible at impact. The heads arean updated version. The sleek black look combined
made of stainless steel, and there is an additional facewith the copper metal color, as well as the putter's
insert made of a different type of stainless steel, andshape, make it a really beautiful instrument. Soft hand
the insert is given an elastomer border which helpsstitched leather grips are standard.
give good feel and sound at impact. The differenceThe two mallet putter product lines offered by
between the Red X and the Red X2 is in the shaftCameron and Titleist, the RED X® series and the
configuration. The Red X has a single bend one shaftFuture Phantom mallet putters, offer an exceptional
offset and the shaft connects to the putter headrange of choices for golfers who are sold on mallets. I
about half way between the center of the mallet headhave used a mallet for years because it let me hit solid
and the heel. There is no shaft offset on the Red X2,putts on a consistent basis. For the golfer who has
and the shaft connects to the mallet just behind theeverything, the two limited edition lines provide unique
middle of the putter head. All the putters in the Red Xputter choices as well.